「American Society of Testing and Materials」に関連した動画の一覧

	An Inside Look at DPW's Materials Testing Lab (Mini-Doc)  Darren Sciford offers a tour of the DPW Materials Testing Lab, which is responsible for ensuring public safety by testing the quality and integrity of the materials that go into our city's streets and infrastructure. They provide professional quality control services to ensure that construction materials used in projects are in compliance with contract plans and specifications. Both in the laboratory and out in the streets, the technicians test soil compactness and consistency, asphalt composition, and concrete strength. In addition, the lab follows stringent American Society for Testing and Materials guidelines in order to ensure that materials are properly analyzed. 2010年08月10日再生回数 734
	An Inside Look at DPW's Materials Testing Lab  Darren Sciford offers a tour of the DPW Materials Testing Lab, which is responsible for ensuring public safety by testing the quality and integrity of the materials that go into our city's streets and infrastructure. They provide professional quality control services to ensure that construction materials used in projects are in compliance with contract plans and specifications. Both in the laboratory and out in the streets, the technicians test soil compactness and consistency, asphalt composition, and concrete strength. In addition, the lab follows stringent American Society for Testing and Materials guidelines in order to ensure that materials are properly analyzed. 2010年07月30日再生回数 605
	Stop Global Warming by Growing Styrofoam with Fungi  Greensulate™, is a direct replacement for expanded polystyrene (EPS) products. Composed of renewable agricultural waste resources and mycelium fibers, Greensulate™ is produced without petroleum or light, requires no significant heat, is non-allergenic, and is less expensive to produce than foam products. It can be produced at room temperature, in a wide range of benign environments, and is less expensive to produce than petroleum based foam products. Our vision is to provide a sustainable alternative to synthetics, such as plastics and foams, which can be produced locally, around the world. In addition to functioning as an insulator, initial testing to American Society for Testing and Materials (ASTM) Standards has shown Greensulate™ to have a greater compressive and flexural strength than EPS, and also act as a firewall. Ecovative will continue material optimization and compliance testing throughout 2009 with a target date set for mid-2010 to offer a commercially available insulation product. 2008年10月20日再生回数 15990
	Degradable and biodegradable plastic waste-d2w  Symphony Environmental Technologies Plc is a British Public Company established in 1994 and dedicated to Controlled-life Plastic. It has 59 Distributors around the world, and is present in more than 90 countries. The Chairman is a Member of the European Parliament, and the Board includes a Member of the UK Parliament. Symphony has its own laboratories in England with the latest equipment, where it constantly tests, develops, and improves its products. Symphony is a member of the Oxo-biodegradable Plastics Association (www.biodeg.org), the Society for the Chemical Industry (UK) and the American Society for Testing and Materials (ASTM). Symphony holds an ISO 9001-2008 certificate for quality management, and is represented on the British Standards Institute. Symphonys Technical Department includes more than 30 years experience in oxo-biodegradable technology and in the manufacture of plastic products. Symphony is therefore able to provide a first-class product, and after-sales service without parallel in the industry. d2w TECHNOLOGY Plastic is a very useful material which is indispensible for modern life, but the problem is that it can lie or float around for decades if it gets into the environment. Symphony has developed a low-cost insurance. It is a special formulation called d2w which is added to the plastic when it is being made. It breaks the molecular chains within the polymer, and makes plastic self-destruct in the presence of oxygen on land or water at the end of its ... 2010年04月19日再生回数 8508
	BioScience Laboratories Glove Juice Sampling Procedure for ASTM E1174 E1115  The Glove Juice Sampling procedure is used in the ASTM (American Society for Testing and Materials) E1174 and E1115; the Healthcare Personnel Hand Wash Evaluation and the Surgical Hand Scrub test methods to take bacterial samples from the hands of subjects who have used an antimicrobial hand wash/rub product. The Glove Juice procedure is one of several hand sampling methods but, this particular method has been demonstrated to be the most thorough and accurate way to recover bacteria from the hands. This procedure is used regularly by the Scientific Personnel of BioScience Laboratories, as demonstrated in this video. 2009年07月23日再生回数 2654
	BioScience Laboratories Innoculation Procedure used in ASTM E1174 and ASTM E1115  This video demonstrates the inoculation/contamination procedure used in the ASTM (American Society for Testing and Materials) E1174 test method for Healthcare Personnel Hand Wash products. This particular test method specifies the use of Serratia marcescens as the contaminating organism. The challenge organism can be changed depending on the specific needs of the intended market for the product. For example, if the product being tested is intended for use in the Food Service industry, Escherichia coli or Salmonella may be used for the challenge organism to measure the effectiveness of the product. BioScience Laboratories specializes in the evaluation of Topical Antimicrobial products and has used various bacterial and spore strains as challenge organisms for determining the effectiveness of antimicrobial/antibacterial products such as: Methicillin Resistant Staphylococcus aureus, Serratia marcescens, Staphylococcus epidermidis, Escherichia coli, Salmonella and Clostridium difficile. 2009年07月23日再生回数 2763
	Biodiesel Production & BQ9000 Certification  The National Biodiesel Accreditation Program is a cooperative and voluntary program for the accreditation of producers and marketers of biodiesel fuel called BQ-9000®. The program is a unique combination of the ASTM standard for biodiesel, ASTM D6751, and a quality systems program that includes storage, sampling, testing, blending, shipping, distribution, and fuel management practices. BQ-9000® is open to any biodiesel manufacturer, marketer or distributor of biodiesel and biodiesel blends in the United States and Canada. Contact Klean Industries for more information on building out your biodiesel solution: www.kleanindustries.com 2009年02月21日再生回数 1010
	Biofuel is Taking Flight  An increased focus on reducing fossil fuel usage to minimize climate change has propelled aircraft manufacturers to investigate the use of biofuels. Biofuels are providing reasons for the aviation industry to be hopeful, as a means of achieving sustainability. The American Society for Testing and Materials (ASTM) has recently given the preliminary approval to the blending of 50% biofuels produced from algal, jatropha, municipal waste and other cellulosic feedstocks in aviation fuels. Final approval is expected in July 2011. Lufthansa and Airbus are expected to begin a six-month commercial trial of a 50 percent biofuel blend, on four flights per day operating between Frankfurt and London. Bioenterprise works with a company who produces biofuel from agricultural crop residues and waste, and purpose-grown cellulosic feedstock. With the recent surge of aviation biofuel interest, perhaps there's an opportunity to vertically integrate. 2011年06月11日再生回数 542
	BioScience Laboratories Hand Washing Procedure used in ASTM E1174 and ASTM E1115  The Hand Washing procedure demonstrated in this video is used in the successful completion of the ASTM (American Society for Testing and Materials) E1174 and E1115; the Healthcare Personnel Hand Wash Evaluation and the Surgical Hand Scrub test methods. These particular test methods are used to evaluate the antimicrobial efficacy of antimicrobial hand soaps/sanitizers used in healthcare facilities around the world. BioScience Laboratories specializes in the evaluation of such products and performs both methods on a regular basis for product manufacturers around the world. 2009年07月24日再生回数 4701
	Palusol fire protection  The movie shows the impact and processing of Palusol® fire-protection panels. They are classified as non-combustible building material. In case of fire, the silicate panel expands under the action of heat with generation of foaming pressure (see picture). The non-combustible, heat-insulating and pressure-resistant foam formed prevents fire and smoke from spreading to other rooms for a given period of time by filling joints and gaps. The new Palusol SW, a ready-made sandwich product composed of Palusol fire-protection panels and high-density fiberboards, can be integrated into fire doors and carries existing certification under ASTM (American Society for Testing and Materials) and BS (British Standard). 2011年04月21日再生回数 932